1. Protective suits must be inspected and pressure tested to ensure they are free of defects. Also, protective suits must be selected according to their intended use.
2. However, if necessary, apply anti-fogging agent to the inside of the protective suit's goggles according to the recommended instructions.
3. Choose a two-person "cooperative team," meaning one person assists while putting on the protective suit.
4. Underwear should be worn under the protective suit; at least long-sleeved shirts and long pants, or long underwear, are recommended. Fire-resistant underwear should be considered.
5. Remove personal items that may damage the protective suit, such as pens, badges, and jewelry.
6. Remove shoes (this step can be omitted when wearing a protective suit with attached rubber boots). Some rubber boots do not allow outdoor shoes to be worn inside.
7. Tuck the pant legs into long socks to facilitate putting on the protective suit's pant legs and rubber boots.
8. If using a self-contained breathing apparatus (SCBA), check and install the device, complete all connections, and adjust according to the manufacturer's requirements. Do not wear the face mask unless required by the breathing apparatus.
9. If using a breathing tube air supply system (BTS), check and complete all connections and adjustments. Do not wear the face mask unless required by the breathing apparatus.
10. Sit and place both legs into the protective suit.
11. Place both feet into the overcoat boots and pull down the splash guards on the overcoat boots. (Note: Work boots should be 1-2 sizes larger than your usual boots to allow enough space for the protective suit boots to fit inside the overcoat boots.)
12. Turn on the air supply device, put on the face mask, and confirm that the air supply system is working properly.
13. Stand up and fasten the inner waist belt, if applicable.
14. Pull the arms and head into the protective suit, zip up the zipper, and then close the zipper cover.

