Lead-free Gamma-ray Shielding

Lead-free Gamma-ray Shielding
Product Introduction:
Lead-free Gamma-ray shielding
No toxic,Environment friendly, Lead free, Engineered for Military and Nuclear Power Applications.

The global shift away from toxic lead-based shielding materials is accelerating, and lead-free gamma-ray shielding is at the forefront of this transformation. The ALF series from Newlife is a next-generation lead-free gamma-ray shielding material that offers superior attenuation performance, environmental friendliness, and substantial weight savings.
Send Inquiry
Description
Technical Parameters

Lead-free Gamma-ray shielding

No toxic, Environment friendly, Lead free, Engineered for Military and Nuclear Power Applications.

The global shift away from toxic lead-based shielding materials is accelerating, and lead-free gamma-ray shielding is at the forefront of this transformation. The ALF series from Newlife is a next-generation lead-free gamma-ray shielding material that offers superior attenuation performance, environmental friendliness, and substantial weight savings.

Substantial weight savings for Gamma-ray shielding
Superior attenuation performance

 

Product Specification

Application

Nuclear Emergency

Part No.

ALF-125W

ALF-025W

Pb equivalence

0.125mmPb

0.25mmPb

γ Energy

Am241/Lower than 100KeV

Areal Density

1.2kg/㎡

2.25kg/㎡

Thickness

0.31±0.02mm

0.61±0.02mm

Hardness-Shore A

70±2

Operating Temperature

-20℃-80℃

Standard Size

1250mm*20M

 

Why Lead-free Gamma-ray Shielding Matters

Traditional lead shielding poses serious health and environmental hazards – from toxic dust generation during installation to costly disposal as hazardous waste. This lead-free gamma-ray shielding solution eliminates these concerns entirely. Engineered specifically for nuclear emergency response and low-energy gamma sources including Am-241, Fe-55, and Pu-238 (below 100KeV), this lead-free gamma-ray shielding material delivers equivalent protection to traditional lead while reducing weight by over 30%.

Engineered specifically for nuclear emergency

Technical Excellence

Independent verification – Testing at the China Institute of Atomic Energy confirms that a double‑layer configuration using ALF-125W achieves over 90 % shielding efficiency against Am‑241 (a common gamma-ray source).

 

Compliant and Certified
This lead-free gamma-ray shielding material fully complies with LD86-1996, the Chinese standard for radiation protective clothing below 100keV. It has been tested and verified, confirming its shielding performance meets or exceeds international requirements for nuclear emergency personal protective equipment.

Weight comtrast under the same shielding

 

Testing Method For Protection Efficiency Of Radiation Protective Clothing

Testing Data:LD86-1996 Radiation protective clothing under 100kev

A1 This appendix is applicable to the inspection of the protection efficiency of radiation protective clothing and radiation protective cloth.

A2 Testing instrument

X(γ)dosimeter, such as S80 multichannel analyzer, Farmer2570 dosimeter.

A3 Testing conditions&methods

A3.1 Conditions

Silicon-lithium probe is used for X-ray testing, and high-purity probe is used for X-ray testing.

The ray sources are 238PU, 241Am and 55Fe .

A3.2 Methods

The Fig 1 shows the testing theory. The radioactive source beam hole is 8mm~12mm, the distance between the beam hole and the sample is 1mm ~2mm, the distance between the sample and the dosimeter is 1 mm~2mm, and the probe diameter is 2mm~ 2.5 mm. Adjust the radiation generated by the radioactive source to the range received by the probe.

 

product-447-116

 

 

 

Hot Tags: lead-free gamma-ray shielding, China lead-free gamma-ray shielding manufacturers, suppliers, factory, Industrial Grade Gamma Protective Vinyl, Lead free Gamma ray Shielding, Non Lead Nuclear Shielding Blankets, Non Lead Nuclear Shielding Pipe Wrap, Nuclear Radiation Protective Gloves, Nuclear Radiation Protective Shoes

Send Inquiry