Protective face mask maintenance methods

Aug 07, 2026

Leave a message

1. Remove the filter element;

2. Clean the face mask (excluding the filter element) using a face mask wipe, or soak the mask in a neutral (pH 6-8) lukewarm water solution (water temperature should not exceed 49°C). Clean the mask with a soft brush until clean. Do not use lanolin or other oils, gasoline, or fluorinated degreasers (such as trichloroethylene), organic solvents, or abrasive cleaners;

3. Disinfect the mask by soaking it in a quaternary ammonium salt, sodium hypochlorite disinfectant, or other similar disinfectant;

4. Rinse the mask with clean lukewarm water and air dry in a clean, uncontaminated area;

5. Carefully inspect the mask components before each use. If any components are damaged or malfunctioning, replace or discard the mask;

6. When not in use, store the cleaned mask in its packaging bag, away from contaminated areas.

Send Inquiry